Description:
Lifting your Scout can have a dramatic effect on is performance, handling, and appearance, but as the old saying goes, “buy once, cry once”. Inferior components and materials can ruin your ride and leave you longing for the days when you had your stock setup again. That’s why we’re proud to partner with Atlas Suspension and offer you premium suspension components made right here in the USA. Hand crafted by skilled technicians in sunny Southern California, all of Atlas Springs’ products are made from high quality North American components. Atlas leaf springs include anti-friction pads inserted between each leaf for a smoother ride and quiet operation, full military-wrapped spring eyes for safety and superior durability, riveted rebound bolt clips, and a premium paint finish is our standard. This 4” Lift Kit will give you the ground clearance needed to tackle the trails, and enough room to fit a set of 33’s on your Scout, all while maintaining your handling and ride quality on the road.
Spring Type:
Each of Atlas’ suspension kits comes with the choice of their signature Progressive Pack springs, or their sturdier Expedition Pack.
- Progressive Pack: These leaf springs are designed with one thing in mind; performance. Instead of employing a three or four leaf, two stage design as is typical of an OEM spring, they consist of several thin flexible leaves (as many as twelve per pack depending on the application!), resulting in a multistage spring with a very forgiving street ride, even in the heaviest trucks. They do well in daily drivers, pre runners and rock crawlers alike! If you do a lot of towing or hauling with your vehicle, we recommend you look to our Expedition Pack springs, as the Progressive Pack springs are not designed with heavy loads in mind.
- Expedition Pack: The Expedition Packs are geared towards the off-road enthusiast that requires a little of both worlds; flexibility, and load carrying capacity all in one. Essentially two springs in one, we designed this style of leaf spring as a progressive two stage pack. All the great and innovative features of an off-road Progressive Pack are included with this design, but we add an additional load carrying 2nd stage that helps for towing and hauling.
Custom Spring Rate:
Each set of Atlas Springs is made to order, and part of that process involves calculating the appropriate spring rate for your vehicle. Spring rate is the amount of force that is required to compress, extend, or twist a spring one inch, and it is influenced by the Gross Vehicle Weight (GVW) of your Scout. Making modifications to your Scout can have a drastic impact on your vehicle weight, so it’s important to take inventory of any alterations that could reduce or increase the weight of your vehicle. For example:
- Front or Rear Aftermarket Steel Bumpers
- Front or Rear Winch
- Larger Wheels & Tires + Tire Carriers
- Roof Racks
- Roof Top Tents
- Awnings
- Gerry Cans/Fluid Storage
- Hi-Lift Jacks
- Refrigerators
- Custom Storage Enclosures
- Skid Plates
- Aftermarket Gas Tanks
- Hard Top/Soft Top/No Top
- LS Engine Swap (Can reduce weight by 250lbs)
We offer three different tiers of springs rates to accommodate your build, so select from the options below before purchasing:
- Tier 1: Factory Gross Vehicle Weight or Less: If you’re keeping things stock, or you’ve reduced the weight of the vehicle by removing the top, transitioning from a hard top to a soft top, or performing an LS Swap, this is the appropriate tier for you.
- Tier 2: GVW + 500lbs: It’s easy to increase the weight of your vehicle with just a few aftermarket accessories like roof top tents, bumpers, or spare tire carriers. If you’ve made only a few modifications to your vehicle, this is the tier for you.
- Tier 3: GVW + 1000lbs: If you’re building your dream overland Scout or a beefy rock crawler, this is the tier for you. Tier 3 is for customers adding a significant amount of weight to the vehicle, through multiple aftermarket accessories that will add up to 1000lbs or more.
Axle Configuration:
Atlas Suspension offers an optional 1” Front Axle Push to extend you wheelbase and improve your stability.
U-Bolt Kits:
U-Bolt’s are not included with the leaf springs, as each build may have unique requirements. We offer a variety of U-Bolt kits from Atlas Suspension and other premium aftermarket suppliers, which you can see below in the recommended product section, or under our Suspension collection.
Ordering, Fulfillment and Shipping: After your order is placed a sales representative from Scout or Die will contact you to review your product selection and calculate additional costs such as shipping or installation services, when applicable. Due to the volatile nature of freight shipping costs it’s much easier for us to calculate precise shipping for your location rather than estimating the cost online. Please use the Contact Us page if you have any questions prior to ordering.
Installation Services Available:
Installation services are available (schedule permitting) through our partner shop, DVF Customs in Van Nuys, CA. Please use the Contact Us page to inquire about availability prior to purchasing. If not, a sales representative will contact you after placing your order.
Note: Please note, some images are representative and not all options are shown. The blue Scout in this photo album has a 4” Atlas Suspension Lift Kit and 33” tires.
Installation services for most products are available through our partner shop, DVF Customs, in Van Nuys, CA (schedule permitting). Use the form below to inquire about pricing and availability.
Please include the Year, Make and Model of your vehicle when contacting us about parts or service.SHIPPING POLICY
- Shipping rates are subject to change based on our carriers variable pricing
- Shipping available to the lower 48 states only by default
- If you live in a different region and would like to purchase from us please contact us prior to order so we can research shipping charges to your location
- Pickup from our shop in Van Nuys is only available for some custom fabrication parts, as indicated on Individual product pages
RETURN AND REFUND POLICY
Returns: Ordered Incorrectly or Return for Credit
- Returned products are required to be in brand-new condition and include the original undamaged manufacturer's packaging with all packaging materials, including packing inserts, plastic bags please include the original receipt with the product
- Upon contacting us customers shall receive a UPS Return label
- Ship the items back to us within seven (7) days of receiving your label
- Your refund will be processed within 3-4 days after the item has been received and inspected at our facility
- Refunds will be made by crediting the original method of payment
- All items are subject to a minimum 15% restocking fee
- Return Shipping is paid for by the customer
- Scout od Die does not issue credit on any made to order materials/products
- Custom orders and/or special items are not eligible for return and/or exchange
- All sales are final on: Clearance, Blowout Sale, Special Deals, or any items categorized under these descriptions
Returns: Defective or Blemished
- Returns accepted within 90 days of purchase date
- We pay for return shipping
- Parts will be Exchanged for New
Product Disclaimer:
Because of their intended usage, the manufacturer makes no warranties whatsoever, express or implied, oral or written, to purchasers of their products regarding performance, safety, fit, merchantability, or length of service. Purchasers are responsible for selection of proper goods and must rely on their own skill or judgement that such goods are suitable for purchasers’ application.
Fitment Notes:
Many of the parts and products featured on our website are used for modifying and upgrading vehicles. As a result we cannot guarantee fitment on your specific vehicle since custom fabrication and modifications can create unique fitment challenges. Reference your service manual and work with your mechanic/shop to determine approriate fitment before purchasing products.